Quote:
Originally Posted by J Blatz
Thanks Scott. Now I can get going on my Lasersonic 775.
|
Few notes on these.
first off, I do not have the actual instructions or detailed plans on some of these, just my 'in case we need to replace one' fin tracings, along with notes I made re: tube lengths, etc.
since these are real strighforward, easily cloned.
on the Transonic 775 - this used the BT20HD ( thick wall ) , two 12" sections, with coupler ( glued, not a seperation point), and the vintage nes I had ALL came with Centuri PNC76 cones ( 2 pc cones ) .
Note on the Lasersonics 1.2 - the cardboard tube/ plywod fin version had larger fins,and used a 24" tube.
the all fiberglass one used a shorter 21" G12 tube ( so he could cut two from the 42" lengths he stocked ) and smaller G10 fins, not sure why he did that ... ( pics of my 1.2+ glass version below ) .
note both used FSI hardwood cone form the OSO kit, but hollowed out to add weight.
other comments / notes to follow, ask if you need info.
~ AL