Originally Posted by Earl

All-

Attached below are PDFs of the two instructions sheets, fin and wood strips, and decals for the Centuri Lance Corporal.

The main instruction sheet (pdfs 1-2) were a single one-sided 11 x 17 sheet folded into 'quarters'.

Instruction sheets 3 and 4 were a single 8.5 x 11 sheet printed front and back.

The fins and wood strips are 1/16th balsa. Strips are 1/16th inch square.

Main body tube is 9 inches long. Booster tube and sustainer motor tube are the standard 3" lengths.

Decals have been scanned at 300 dpi jpeg (TIFF was beyond the 2mb upload limit).

Nose cone is the Centuri PNC-74, which has a more rounded tip that the previously mentioned PNC-76.

Hope this helps.

Earl