View Single Post
  #2  
Old 10-08-2019, 11:53 PM
ghrocketman's Avatar
ghrocketman ghrocketman is offline
President, MAYHEM AGITATORS, Inc.
 
Join Date: Jul 2005
Location: Nunya Bizznuss, Michigan
Posts: 13,443
Default

Use epoxy; not 5 minute either. Use at least "15 minute", better yet 30 minute.
Drill 1/16 holes into the body tube spaced 1/2" apart along the fin mounting lines before mounting the fins.
These holes form "rivets" locking the fins to the tube.
Fillet the fins with epoxy.
It will survive on any G motor short of the G669 Warp-9 Aerotech load.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!!

Yes, there is such a thing as NORMAL
, if you have to ask what is "NORMAL" , you probably aren't !

Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY.
ALL systems are GO for MAYHEM, CHAOS, and HAVOC !
Reply With Quote