01-02-2020, 09:56 PM
|
|
Sometimes collector
|
|
Join Date: May 2008
Posts: 1,786
|
|
For the 29mm removable mount, the instructions have you use a vane for a spacer, set the rings and mid spacers in place, then apply glue fillets. 11 of the 12 vanes were still in the sheet so I pre-sanded them. I used four vanes, ran beads of glue and quickly slid the parts together to get glue under the joints, and pushed down on the rings to set everything in place, then used a q-tip to fillet the joints. I am using up an old bottle with thick glue where it won’t show.
|