View Single Post
  #7  
Old 08-04-2008, 12:27 PM
Bluegrass Rocket Bluegrass Rocket is offline
Pickin' and launching.
 
Join Date: Jan 2008
Location: Indianapolis, Indiana
Posts: 267
Default

I believe SEMROC already has the fins available laser cut. Search the laser cut balsa page under Athena. I don't think they include the 4 pod standoffs, which, I believe, are the same as for the Orion. Pod tubes are 3" long series 7 (ST-730) with 1" long conical balsa cones (BC-710). The lower body tube is series 16, 18 inches long (ST-16180). The upper tube is series 20, 9.8 inches long (ST-2098). It uses a balsa adaptor 16 to 20, 1.5 inches long (BR-1620). Add a Orion shaped balsa cone (BC-2032) and you almost have it all. The lug was glued on the larger 20 series tube with another one glued in alignment on one fin. Just add a 24mm, or larger, engine mount, wraps and decals. Hope this helps.
__________________
Rick Randol
NAR #28062, ROCI Section #625
http://www.newwayspacemodels.com
http://www.indyrockets.org
NewWay Space Models-We Cornered Model Rocketry
Reply With Quote