View Single Post
  #19  
Old 12-22-2018, 08:16 AM
aeppel_cpm aeppel_cpm is offline
Ciderwright
 
Join Date: Apr 2013
Location: Burlington, WI
Posts: 581
Default

I think youíre on the right track - though the third clamp actually has the least grip. It must have a weaker spring. But the one sided part likely was the root cause. Since this was paper to wood, I used Titebond II. I suspect the moisture left at different rates on the two sides. If I ever do this again, Iíll try epoxy.

I tried an overnight bend. Wet with ammonia water, then clamp against the rail with a 1/8th spacer on the nose and a clamp on the tail and nothing between.

It worked. Iím putting the edge balsa on now.
__________________
Charles McGonegal
Ciderwright
AEppelTreow Winery & Distillery
Ad Astra Tabernamque!
Reply With Quote