John and all,

Thanks so much for your comments! I took all of them under consideration, and decided to enlarge the fins by 137%, but then "thin them back down" to the original 3/32" thickness.

I also substituted many of the original parts with replacements from the "updated" RockSim files, e.g. using fiber instead of cardboard for the centering rings.

I suppose the only suggestion I would make is to use a nylon chute for the B6-4 motor , or just use a B4-4 instead.

Any additional comments before I release this into the wild? I mean, the BARCLONE Stable?


After this, we tackle streamers for the 1.00X Prometheus. (sly look)


.

Attached Thumbnails

 

Attached Files

Retrograde_v3.rkt (71.1 KB, 76 views)

__________________
Jay Goemmer
"Centuri Guy"/"Tau Zero"
YORF Member 28
Semroc SAM #0029
NAR 86131


"I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. "

--Bill Eichelberger, 02/22/2022


“Centuri fret buzz in an updated form.”
Bill “Wallyum” Eichelberger re: Estes Flutter-By
03 Sept 2014