|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
Looking for at least a 14” length of Semroc LT-225 to complete an SLS Laser-X
I have the parts for an SLS Laser X but only have shorter sections of LT225 so it will be more difficult to piece them together and fit the motor mount.
I was wondering if a one has at least a 14” length of Semroc LT-225 they would be willing to sell. The tube is 2.25” ID and 2.340” OD. Thanks for looking. |
#2
|
||||
|
||||
I was going to suggest the eRockets clearance on the Semroc SLS tubes, but it looks like they have sold out all the longer 225 size tubes. I bought some of the longer 175 tubes, but none of the 225 size.
Earl
__________________
Earl L. Cagle, Jr. NAR# 29523 TRA# 962 SAM# 73 Owner/Producer Point 39 Productions Rocket-Brained Since 1970 |
#3
|
||||
|
||||
P.S. - They do still have 7" lengths, if you get desperate and want to piece sections together with hollow couplers.
Earl
__________________
Earl L. Cagle, Jr. NAR# 29523 TRA# 962 SAM# 73 Owner/Producer Point 39 Productions Rocket-Brained Since 1970 |
#4
|
||||
|
||||
I couldn’t put 2 seven inch tubes in the cart so I got 2 6s and 7, so I can use the seven on one end and the six on the other, with a one inch piece in the middle, all joined by a a five inch coupler made from the rest of the 6 inch tube (split) but it will be a pain. I also discovered that bth-70 makes a pretty good coupler. I’ll need to slot the tube (12 slots) or sand off the fin tabs so one tube would be a big help.
|
#5
|
||||
|
||||
I have a 22" section of LT225 if you are interested. If not I guess I need to order a nose cone.
Contact me at crussell51 at Hotmail dot com Chas
__________________
Charles Russell, MSgt,USAF (ret.) NAR 9790, Lvl 1 SAM "Balls Three" |
#6
|
||||
|
||||
Thanks!
|
#7
|
||||
|
||||
I have some in stock.
|
Thread Tools | Search this Thread |
Display Modes | |
|
|