|
#1
|
||||
|
||||
Saturn 1b 1:156 Scale 3d Printed
Besides the Pershing 1A, I have another 3D printed rocket project underway, a Saturn 1B. The main body is constructed around a BT-60 sized body tube. The scale will be about 1:156. The 3D files were created by scottdee (who frequents YORF as scott_mills) and I downloaded them from https://www.thingiverse.com/thing:2958861. I upscaled the fin unit to 103% so the inside diameter matched the inside diameter of a BT-60. By chance, 8 BT-4 Semroc tubes from eRockets seem to fit perfectly inside the BT-60 and the fin can now that I slightly upscaled it. Unfortunately a BT-20 for the engine mount is a tiny bit too big to fit inside the BT-4s without deforming them, but no worries, I'll trim a tiny bit out of the BT-4s the length of the engine mount. Unfortunately the vendor shipped the wrong length of BT-4s, they made it right with no hassle, as soon as the replacement tubes arrive I can start assembly this coming weekend, along with starting to assemble the Pershing too!
__________________
Tim "You know, it, uh, won't fly unless somebody pushes the button." From the movie October Sky. I am SAM # 0167 NAR 98303 Southwestern Ohio Rocketry Association (SORA) #624 https://www.rocketryohio.com Last edited by timorley : 05-20-2019 at 09:37 PM. |
#2
|
||||
|
||||
And while the BT-4s I got were too short, they were long enough for me to verify BT-4s will work just fine for the 8 tanks.
__________________
Tim "You know, it, uh, won't fly unless somebody pushes the button." From the movie October Sky. I am SAM # 0167 NAR 98303 Southwestern Ohio Rocketry Association (SORA) #624 https://www.rocketryohio.com |
#3
|
||||
|
||||
That's an interesting scale size for a 1b. That would be good for demos in small fields.
If you can, post photos of the Pershing and this 1b as you go along on your build. Earl
__________________
Earl L. Cagle, Jr. NAR# 29523 TRA# 962 SAM# 73 Owner/Producer Point 39 Productions Rocket-Brained Since 1970 |
#4
|
|||
|
|||
Nice can't wait to see it finished
|
#5
|
||||
|
||||
The replacement BT-4 body tubes arrived today. Dang Post Office, I fear the worst......
__________________
Tim "You know, it, uh, won't fly unless somebody pushes the button." From the movie October Sky. I am SAM # 0167 NAR 98303 Southwestern Ohio Rocketry Association (SORA) #624 https://www.rocketryohio.com |
#6
|
||||
|
||||
Miracles of miracles, nothing was crushed. The top of the box was crushed, but the tubes were in the bottom, safe and sound.
__________________
Tim "You know, it, uh, won't fly unless somebody pushes the button." From the movie October Sky. I am SAM # 0167 NAR 98303 Southwestern Ohio Rocketry Association (SORA) #624 https://www.rocketryohio.com |
Thread Tools | Search this Thread |
Display Modes | |
|
|