Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > BARCLONE > Designer's Studio
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Closed Thread
 
Thread Tools Search this Thread Display Modes
  #41  
Old 01-04-2009, 05:21 PM
rkt2k1 rkt2k1 is offline
Just another BAR!
 
Join Date: Mar 2005
Posts: 131
Default Semroc Engine Blocks / Thrust Rings - Rocksim Parts

Here are the Semroc engine blocks / thrust ring parts for Rocksim. The defaults part file contained most of these parts. I just added a few additional parts found on the Semroc web-site and followed same formatting as other part files.

This file should be considered as DRAFT until it can be reviewed and validated. Craig will give ok or post as master file.

Data for these parts was pulled from Semroc web-site. If any of the parts or data seem inaccurate please let me know.

Thanks!

... Bill
Attached Files
File Type: csv EBDATA_Semroc.CSV (975 Bytes, 107 views)
Reply With Quote
  #42  
Old 01-04-2009, 08:08 PM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Default

Bill,

I just looked at my copy of the data file, and I couldn't see that error, either. It's possible that, with so many copies running around here, I might have been using an older data set which contained the error. If I spot something again, I'll post the visual output so you can see what I'm seeing.
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #43  
Old 01-04-2009, 08:12 PM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Exclamation New Plan -- Starling

This one probably belongs in the Empyria series. Gentle DV numbers, too...

Length: 24.20"
Diameter: 1.04" (ST-10)
Fin Span: 7.85"
Weight: 1.56 oz


A8-3......166'......Dv 12 FPS......36" x 1/8" rod
B4-4......397'......Dv 7 FPS.......36" x 1/8" rod
B6-4......404'......Dv 1 FPS.......36" x 1/8" rod
C6-5......864'......Dv 4 FPS.......36" x 1/8" rod


Enjoy!
Attached Thumbnails
Click image for larger version

Name:  Starling 2D.jpg
Views: 119
Size:  88.3 KB  Click image for larger version

Name:  Starling 3D.jpg
Views: 176
Size:  36.4 KB  
Attached Files
File Type: rkt Starling.rkt (84.1 KB, 133 views)
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #44  
Old 01-04-2009, 08:20 PM
rkt2k1 rkt2k1 is offline
Just another BAR!
 
Join Date: Mar 2005
Posts: 131
Default

Quote:
Originally Posted by CPMcGraw
Bill,

I just looked at my copy of the data file, and I couldn't see that error, either. It's possible that, with so many copies running around here, I might have been using an older data set which contained the error. If I spot something again, I'll post the visual output so you can see what I'm seeing.


Craig - no worries! I'm just glad there doesn't seem to be an error.

I've documented all the centering ring data from the Semroc website and have started working on the CRDATA file. It may take a day or so, as I start back to work tomorrow.

... Bill
Reply With Quote
  #45  
Old 01-04-2009, 08:21 PM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Default Design Count Update

579...
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #46  
Old 01-05-2009, 12:48 AM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Exclamation New Design -- Night S.H.A.D.O.

From the sketch collection...

RockSim says this bird will fly as-is, but I'm not making any promises. You will need to balance the glider and trim it for a good glide, then mark the CP. Arrange it directly over the CP position on the boost pod before mounting the launch lug hold down to the pod, and a dowel and pylon (not shown) on the bottom of the glider.

Length: 19.62" (this will change, depending on the final position of the glider)
Diameter: 1.50" (BC-1043)
Fin Span: 10.48"
Weight: 1.75 oz


B4-4......362'......Dv 10 FPS......36" x 1/8" rod
B6-4......370'......Dv 5 FPS.......36" x 1/8" rod
C6-5......806'......Dv 7 FPS.......36" x 1/8" rod


Do not use the A8-3. It doesn't have enough power to get the model moving rapidly enough off the rod.

Enjoy!
Attached Thumbnails
Click image for larger version

Name:  Night SHADO 2D.jpg
Views: 129
Size:  103.3 KB  Click image for larger version

Name:  Night SHADO 3D [2].jpg
Views: 167
Size:  40.1 KB  Click image for larger version

Name:  Night SHADO 3D.jpg
Views: 178
Size:  32.8 KB  
Attached Files
File Type: rkt Night SHADO.rkt (113.5 KB, 115 views)
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #47  
Old 01-06-2009, 11:13 PM
Tau Zero's Avatar
Tau Zero Tau Zero is offline
Incurable SEMROC Fan
 
Join Date: Mar 2005
Location: Twin Falls, Idaho, USA
Posts: 2,318
Thumbs up Estes SCAMP 1.36X, 1.68X Upscales

"Now bigger, better, and even Scampier!"


I'm dredging these up from my long-lost and ill-fated "Updated Classic Designs" thread from 2007-ish. Here are the ROCKSIM 8 files (even though you can see they're saved in my RS9 directory).

The 1.36X BT-55 upscale is 18mm, while the 1.68X BT-60 upscale has a 24mm mount.

To replicate the original paint scheme, paint one fin black, and along with the forward 2" of the 1.36X Scamp's BT-55. For the BT-60 version, paint the front 2.5" black.


Enjoy!

.
Attached Thumbnails
Click image for larger version

Name:  Estes_Scamp_168X_02.jpg
Views: 134
Size:  134.0 KB  Click image for larger version

Name:  Estes_Scamp_168X_01.jpg
Views: 137
Size:  123.1 KB  Click image for larger version

Name:  Estes_Scamp_136X_02.jpg
Views: 134
Size:  137.4 KB  Click image for larger version

Name:  Estes_Scamp_136X_01.jpg
Views: 128
Size:  117.6 KB  Click image for larger version

Name:  Estes_Scamp_00.jpg
Views: 173
Size:  41.1 KB  
Attached Files
File Type: rkt Estes_Scamp_136X.rkt (59.3 KB, 142 views)
File Type: rkt Estes_Scamp_168X.rkt (50.8 KB, 145 views)
__________________
Jay Goemmer
"Centuri Guy"/"Tau Zero"
YORF Member 28
Semroc SAM #0029
NAR 86131


"I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. "

--Bill Eichelberger, 02/22/2022


“Centuri fret buzz in an updated form.”
Bill “Wallyum” Eichelberger re: Estes Flutter-By
03 Sept 2014
Reply With Quote
  #48  
Old 01-06-2009, 11:21 PM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Default Design Count Update

582...
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #49  
Old 01-08-2009, 12:54 AM
rkt2k1 rkt2k1 is offline
Just another BAR!
 
Join Date: Mar 2005
Posts: 131
Default Semroc Centering Rings - Rocksim Parts

Here are the Semroc centering ring parts for Rocksim. This file should be considered a DRAFT until it can be reviewed and validated. Craig will give ok or post as master file.

Data for these parts was pulled from the Semroc web-site. If any of the parts or data seem inaccurate please let me know.

While importing and validating this file, I uncovered an issue with the import process. It appears that the material field entries much match capitalization for the part to imported correctly. If not the part is imported with an incorrect material. For example if the entry is "balsa" and not "Balsa" the part gets imported with the first entry in material database CSV (which is usually "G10 PML...".)

I'm including updated files with validated material spelling to resolve this issue.

Thanks!

... Bill
Attached Files
File Type: csv TCDATA_Semroc.CSV (1.9 KB, 103 views)
File Type: csv NCDATA_Semroc.csv (27.4 KB, 103 views)
File Type: csv CRDATA_Semroc.CSV (5.7 KB, 104 views)
File Type: csv EBDATA_Semroc.CSV (998 Bytes, 109 views)
File Type: csv BHDATA_Semroc.CSV (3.5 KB, 100 views)
File Type: csv TRDATA_Semroc.CSV (24.4 KB, 105 views)
Reply With Quote
  #50  
Old 01-08-2009, 02:13 AM
rkt2k1 rkt2k1 is offline
Just another BAR!
 
Join Date: Mar 2005
Posts: 131
Default Semroc Launch Lugs - Rocksim Parts File

Here are the Semroc launch lugs for Rocksim.

This file should be considered as DRAFT until it can be reviewed and validated. Craig will give ok or post as master file.

Data for these parts was pulled from Semroc web-site. If any of the parts or data seem inaccurate please let me know.

Thanks!

... Bill
Attached Files
File Type: csv LLDATA_Semroc.CSV (1.4 KB, 94 views)
Reply With Quote
Closed Thread


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 01:19 PM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2024