#1
|
|||
|
|||
Thrustline Aerospace Scorpion Plans
The link below will take you to the plans for the Scorpion kit.
Each plan set also includes a RockSim file for the kit. That's a good thing since nowhere could I find a parts list of tubing type, length, etc. I'd appreciate it if someone with RockSim or OpenRocket will give me a hand by adding a reply to this post listing the parts type/size you extract from the RockSim file. If you could include the templates from the RockSim file I'd appreciate that as well. http://www.oldrocketplans.com/tla/TLA_Scorpion.zip These Thrustline Aerospace plans are for PERSONAL USE ONLY! John Rowan-Stern and Thrustline Aerospace reserves all commercial use rights.
__________________
Scott D. Hansen Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe! Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies! Ye Olde Rocket Forum WOOSH NAR Section #558 |
#2
|
||||
|
||||
Attached below is the data for the Thrustline Aerospace Scorpion from the RockSim file:
Scorpion parts: Nose cone - Custom, Material: balsa Nose shape: Hollow Ogive, Len: 3.8000 In., Dia: 0.9760 In. Wall thickness: 0.1250 In. Body insert: OD: 0.8510 In., Len: 0.5000 In. CG: 2.4250 In. , Mass: 0.1600 Oz. Body tube Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 3.5000 In. CG: 1.7500 In. , Mass: 0.0892 Oz. Body tube Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 0.1250 In. CG: 0.0625 In. , Mass: 0.0032 Oz. Body tube Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 0.8750 In. CG: 0.4375 In. , Mass: 0.0223 Oz. Body tube Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 5.0000 In. CG: 2.5000 In. , Mass: 0.1274 Oz. Transition BMS - TA5060 - Transition 50-60, Material: Balsa Hollow transition: Fwd. Dia: 0.9760 In., Len: 2.0000 In., Rear Dia: 1.6370 In. Font body insert: Len: 0.0000 In., OD: 0.0000 In., Rear body insert: Len: 0.0000 In., OD: 0.0000 In., CG: 1.1664 In. , Mass: 0.2032 Oz. Body tube Estes - EST 3089 - BT-60, Material: Paper OD: 1.6370 In. , ID: 1.5950 In. , Len: 17.0000 In. CG: 8.5000 In. , Mass: 1.1749 Oz. Custom Fin set - Custom, Material: Balsa (0.125" thick) CG: 1.8727 In. , Mass: 0.3448 Oz., Radial angle 0 degrees Point List in mm : 88.4333367741963, 0. 60.8071855602792, 115.338913336295 45.0904363135692, 115.338913336295 0., 0 Parachute - Custom, Material: Mylar 1 parachute, Shape: 6 sided Dia: 25.3604 In., Spill hole: 0.0000 In. CG: 2.1134 In. , Mass: 3.1608 Oz. Screw Eye Semroc - SE-10 - Screw Eye, Material: CG: 0.0000 In. , Mass: 0.0080 Oz. Mass object - Custom, Material: 1/8 In. flat elastic CG: 0.0000 In. , Mass: 0.0551 Oz. Body tube Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 4.7500 In. Location: 13.1250 In. From the front of Body tube CG: 2.3750 In. , Mass: 0.1210 Oz. Ring BMS - CR2050P - Centering Ring, Material: Paper Centering ring OD: 0.9460 In., ID: 0.7360 In., Len: 0.2500 In. Location: 3.7500 In. From the base of Body tube CG: 0.1250 In. , Mass: 0.1139 Oz. Ring BMS - CR6050F - Centering Ring 60/50, Material: Kraft phenolic Centering ring OD: 1.5930 In., ID: 0.9780 In., Len: 0.0500 In. Location: 13.2500 In. From the front of Body tube CG: 0.0250 In. , Mass: 0.0552 Oz. Ring BMS - CR6050F - Centering Ring 60/50, Material: Kraft phenolic Centering ring OD: 1.5930 In., ID: 0.9780 In., Len: 0.0500 In. Location: 17.0000 In. From the front of Body tube CG: 0.0250 In. , Mass: 0.0552 Oz. Ring BMS - CR5055F - Centering Ring 5055, Material: Paper Centering ring OD: 1.2830 In., ID: 0.9780 In., Len: 0.0500 In. Location: 17.8750 In. From the front of Body tube CG: 0.0250 In. , Mass: 0.0419 Oz. Launch lug Estes - ESTES 2328 - LL-3/16, Material: paper OD: 0.1875 In., ID: 0.1687 In., Len: 0.5000 In., Loc: 6.1250 In. CG: 0.2500 In. , Mass: 0.0017 Oz. Launch lug Estes - ESTES 2328 - LL-3/16, Material: paper OD: 0.1875 In., ID: 0.1687 In., Len: 0.5000 In., Loc: 12.0000 In. CG: 0.2500 In. , Mass: 0.0017 Oz. Custom Fin set - Custom, Material: Balsa (0.125" thick) CG: 1.2285 In. , Mass: 0.1292 Oz., Radial angle 0 degrees Point List in mm : 56.4807383149054, 0. 40.9425322149485, 67.7606279599457 31.0026287434942, 67.7606279599457 0., 0 Tube coupler BalsaMachining.com - C60-4 - 1.592x1.524x4 inch long T60 coupler, Material: Paper Tube couplerOD: 1.5950 In., Hole #1: : 38.7100 In. Len: 3.0000 In. Location: 8.1250 In. From the front of Body tube CG: 1.5000 In. , Mass: 0.3381 Oz. Transition - Custom, Material: Paper Solid transition: Fwd. Dia: 1.6370 In., Len: 1.0000 In., Rear Dia: 1.3250 In. Font body insert: Len: 0.0000 In., OD: 0.0000 In., Rear body insert: Len: 0.0000 In., OD: 0.0000 In., CG: 0.4828 In. , Mass: 0.0303 Oz.
__________________
Bruce S. Levison, NAR #69055 |
Thread Tools | Search this Thread |
Display Modes | |
|
|