Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > The Golden Age of Model Rocketry > Plans & Publications
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-23-2019, 10:23 AM
Ltvscout Ltvscout is offline
Ye Olde Rocket Shoppe
 
Join Date: Jun 2004
Location: Milwaukee, WI
Posts: 6,472
Default Thrustline Aerospace Scorpion Plans

The link below will take you to the plans for the Scorpion kit.

Each plan set also includes a RockSim file for the kit. That's a good thing since nowhere could I find a parts list of tubing type, length, etc. I'd appreciate it if someone with RockSim or OpenRocket will give me a hand by adding a reply to this post listing the parts type/size you extract from the RockSim file. If you could include the templates from the RockSim file I'd appreciate that as well.

http://www.oldrocketplans.com/tla/TLA_Scorpion.zip

These Thrustline Aerospace plans are for PERSONAL USE ONLY! John Rowan-Stern and Thrustline Aerospace reserves all commercial use rights.
__________________
Scott D. Hansen
Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe!
Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies!
Ye Olde Rocket Forum
WOOSH NAR Section #558
Reply With Quote
  #2  
Old 04-24-2019, 09:13 PM
teflonrocketry1's Avatar
teflonrocketry1 teflonrocketry1 is offline
Craftsman
 
Join Date: Aug 2007
Location: Whitehouse, Ohio
Posts: 264
Default

Attached below is the data for the Thrustline Aerospace Scorpion from the RockSim file:

Scorpion parts:

Nose cone - Custom, Material: balsa Nose shape: Hollow Ogive, Len: 3.8000 In., Dia: 0.9760 In. Wall thickness: 0.1250 In. Body insert: OD: 0.8510 In., Len: 0.5000 In. CG: 2.4250 In. , Mass: 0.1600 Oz.

Body tube Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 3.5000 In. CG: 1.7500 In. , Mass: 0.0892 Oz.

Body tube Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 0.1250 In. CG: 0.0625 In. , Mass: 0.0032 Oz.

Body tube Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 0.8750 In. CG: 0.4375 In. , Mass: 0.0223 Oz.

Body tube Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 5.0000 In. CG: 2.5000 In. , Mass: 0.1274 Oz.

Transition BMS - TA5060 - Transition 50-60, Material: Balsa Hollow transition: Fwd. Dia: 0.9760 In., Len: 2.0000 In., Rear Dia: 1.6370 In. Font body insert: Len: 0.0000 In., OD: 0.0000 In., Rear body insert: Len: 0.0000 In., OD: 0.0000 In., CG: 1.1664 In. , Mass: 0.2032 Oz.

Body tube Estes - EST 3089 - BT-60, Material: Paper OD: 1.6370 In. , ID: 1.5950 In. , Len: 17.0000 In. CG: 8.5000 In. , Mass: 1.1749 Oz.

Custom Fin set - Custom, Material: Balsa (0.125" thick) CG: 1.8727 In. , Mass: 0.3448 Oz., Radial angle 0 degrees
Point List in mm :
88.4333367741963, 0.
60.8071855602792, 115.338913336295
45.0904363135692, 115.338913336295
0., 0

Parachute - Custom, Material: Mylar 1 parachute, Shape: 6 sided Dia: 25.3604 In., Spill hole: 0.0000 In. CG: 2.1134 In. , Mass: 3.1608 Oz.

Screw Eye Semroc - SE-10 - Screw Eye, Material: CG: 0.0000 In. , Mass: 0.0080 Oz.

Mass object - Custom, Material: 1/8 In. flat elastic CG: 0.0000 In. , Mass: 0.0551 Oz.

Body tube Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 4.7500 In. Location: 13.1250 In. From the front of Body tube CG: 2.3750 In. , Mass: 0.1210 Oz.

Ring BMS - CR2050P - Centering Ring, Material: Paper Centering ring OD: 0.9460 In., ID: 0.7360 In., Len: 0.2500 In. Location: 3.7500 In. From the base of Body tube CG: 0.1250 In. , Mass: 0.1139 Oz.

Ring BMS - CR6050F - Centering Ring 60/50, Material: Kraft phenolic Centering ring OD: 1.5930 In., ID: 0.9780 In., Len: 0.0500 In. Location: 13.2500 In. From the front of Body tube CG: 0.0250 In. , Mass: 0.0552 Oz.

Ring BMS - CR6050F - Centering Ring 60/50, Material: Kraft phenolic Centering ring OD: 1.5930 In., ID: 0.9780 In., Len: 0.0500 In. Location: 17.0000 In. From the front of Body tube CG: 0.0250 In. , Mass: 0.0552 Oz.

Ring BMS - CR5055F - Centering Ring 5055, Material: Paper Centering ring OD: 1.2830 In., ID: 0.9780 In., Len: 0.0500 In. Location: 17.8750 In. From the front of Body tube CG: 0.0250 In. , Mass: 0.0419 Oz.

Launch lug Estes - ESTES 2328 - LL-3/16, Material: paper OD: 0.1875 In., ID: 0.1687 In., Len: 0.5000 In., Loc: 6.1250 In. CG: 0.2500 In. , Mass: 0.0017 Oz.

Launch lug Estes - ESTES 2328 - LL-3/16, Material: paper OD: 0.1875 In., ID: 0.1687 In., Len: 0.5000 In., Loc: 12.0000 In. CG: 0.2500 In. , Mass: 0.0017 Oz.

Custom Fin set - Custom, Material: Balsa (0.125" thick) CG: 1.2285 In. , Mass: 0.1292 Oz., Radial angle 0 degrees
Point List in mm :
56.4807383149054, 0.
40.9425322149485, 67.7606279599457
31.0026287434942, 67.7606279599457
0., 0

Tube coupler BalsaMachining.com - C60-4 - 1.592x1.524x4 inch long T60 coupler, Material: Paper Tube couplerOD: 1.5950 In., Hole #1: : 38.7100 In. Len: 3.0000 In. Location: 8.1250 In. From the front of Body tube CG: 1.5000 In. , Mass: 0.3381 Oz.

Transition - Custom, Material: Paper Solid transition: Fwd. Dia: 1.6370 In., Len: 1.0000 In., Rear Dia: 1.3250 In. Font body insert: Len: 0.0000 In., OD: 0.0000 In., Rear body insert: Len: 0.0000 In., OD: 0.0000 In., CG: 0.4828 In. , Mass: 0.0303 Oz.
Attached Files
File Type: pdf Scorpion Forward.pdf (1.1 KB, 32 views)
File Type: pdf Scorpion Aft.pdf (1.1 KB, 28 views)
__________________
Bruce S. Levison, NAR #69055
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 12:10 PM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2024