#1
|
|||
|
|||
Estes Mini Brute Hornet fin pattern
In the good ol' days, I was able to print this out to the correct size from JimZ's site. Two computers later, I can't. Anyone have a pdf of this they can share? I've got everything ready to go other than the fins.
__________________
Bill Eichelberger NAR 79563 http://wallyum.blogspot.com/ I miss being SAM 0058 Build floor: Estes - Low Boom SST Semroc - Marauder, Shrike, SST Shuttle In paint: Canaroc - Starfighter Scorpion Centuri - Mini Dactyl Estes - F-22 Air Superiority Fighter, Multi-Roc, Solar Sailer II, Xarconian Cruiser Semroc - Cyber III Ready to fly: Estes - Solar Sailer II Semroc - Earmark |
#2
|
||||
|
||||
If you use IrfanView, you can print out .tiff and .tif at their correct size. Just make sure that the "Original size" option is selected in the print dialog box. You can get at http://www.irfanview.com . Fortunately, this program is free for personal use. HTH.
__________________
'Til next time, Mike Toelle NAR 31692 L1 SAM 0373 |
#3
|
|||
|
|||
Thanks, Mike. That was just what I needed. I couldn't figure out what I used in the past to download stuff like this. Dumb luck on my part back then.
__________________
Bill Eichelberger NAR 79563 http://wallyum.blogspot.com/ I miss being SAM 0058 Build floor: Estes - Low Boom SST Semroc - Marauder, Shrike, SST Shuttle In paint: Canaroc - Starfighter Scorpion Centuri - Mini Dactyl Estes - F-22 Air Superiority Fighter, Multi-Roc, Solar Sailer II, Xarconian Cruiser Semroc - Cyber III Ready to fly: Estes - Solar Sailer II Semroc - Earmark |
Thread Tools | Search this Thread |
Display Modes | |
|
|