#11
|
||||
|
||||
You're welcome. Actually, I'm in St. Hyacinthe but hopefully I can still find a smoked meat sandwich. After my "little cardiac episode" last November I don't dare get any poutine.
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 |
#12
|
||||
|
||||
Yeah, poutine and cardiac "vulnerability" don't mix well at all.
I'm sure your cardiologist would take a very "Dim View" toward consuming any of that.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, and HAVOC ! |
#13
|
||||
|
||||
Steve,
You could get a "clear" fin can 3D printed. I attempted to do this for my clone of the Estes MX-Missile see pictures attached. The files I used were designed by Robnee on Thingiverse https://www.thingiverse.com/thing:1190963 and https://www.thingiverse.com/thing:427688 I used the fin unit from the Beta Launch Vehicle that has slots for fins that you cut out of clear plastic sheet. I used 1/32 clear Lexan for the fins. I printed the fin unit in white ABS because I didn't have any clear ABS or other higher temp melt plastic filament at the time.
__________________
Bruce S. Levison, NAR #69055 |
Thread Tools | Search this Thread |
Display Modes | |
|
|