#11
|
||||
|
||||
Quote:
I looked to see if Sirius had it, but its out of stock. Nice that you have one for “Mr. Mole”.
__________________
Lee Reep NAR 55948 Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor In the Paint Shop: Nothing! Too cold! Launch-Ready: Farside-X, Maxi Honest John, Super Scamp |
#12
|
|||
|
|||
Quote:
Doug, In the future, yes, you can upload stl files here. The system will accept uploads up to 2mb in size.
__________________
Scott D. Hansen Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe! Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies! Ye Olde Rocket Forum WOOSH NAR Section #558 |
#13
|
|||
|
|||
Well, here you go....
|
#14
|
||||
|
||||
Quote:
A BIG thank you to you dholvrsn. I'm sure other will use this for other models. Thanks again. |
#15
|
||||
|
||||
Here's a test print of the Centuri 165 nose cone.
I thought it came out pretty good. A couple of coats of primer and it should smooth out OK. |
#16
|
|||
|
|||
Quote:
You're welcome. Off the top of my head there are the Quasar, ESV Raven, USS America, and the SR-71. Otherwise, it looks like I may have to up the polygon count.... |
#17
|
||||
|
||||
Great job Doug and the Mole
I’ll have to print Some of these to. Thank you for sharing!
__________________
======================= If the Sky is the Limit, then, why is there Footsteps on the Moon? ======================= |
#18
|
|||
|
|||
Printed the cone, thanks again Doug.
Not sure where I left my camera after the 10/10 launch, oops... need to get a photo o fthe cones side by side ( dougs, the 'SR-71' 3d print, and a moldin oldies.. I don't have an original to add to the pile .... |
#19
|
|||
|
|||
Quote:
Is it possible for you to take a side profile pic and post it? Length of the nose cone with and without the shoulder? |
#20
|
||||
|
||||
Quote:
Will get it to you tomorrow. |
Thread Tools | Search this Thread |
Display Modes | |
|
|