#1
|
||||
|
||||
Centuri / Enerjet Parts - 3D Printing
Over on Facebook, Jack Hydrazine shared a link to the group: Centuri Model Rockets.
"I have just published a 3D version of the Enerjet 1340 fin can that's pretty much an exact copy of the real thing which you can download from Thingiverse for free and print. Several Centuri kits used this fin can." https://www.thingiverse.com/thing:3...ps117KR2lpugxR8 "This is a replacement fin can for the following model rockets: Enerjet 1340 Enerjet 1340/20 Centuri Phoenix Bird Centuri Argus Centuri MARS Project Estes Longshot Estes Maniac Estes Challenger II Estes Eliminator Estes Eliminator XL The dimensions were taken right from fin can and put into the CAD program I used to design it. The tubing designed to use it is Centuri ST-13 and the Estes BT-56. You can always scale it up or down to fit. Will it reach and pass through transonic speeds and even into supersonic speeds remains to be seen. The massed produced one that came with various kits was not able to do so." Posted per LTVscout's request.
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
Thread Tools | Search this Thread |
Display Modes | |
|
|