#1
|
|||
|
|||
....
....
Last edited by TigerHawk : 09-01-2023 at 10:02 AM. |
#2
|
|||
|
|||
It works just fine in the Estes PSII 3" tube. Do not know about the BMS T-300. I have read that it is the same tubing, but no personal experience.
|
#3
|
|||
|
|||
Quote:
I have Estes PSII 3” and BMS T-300 tubes on hand - can’t tell one from t’other.
__________________
John Scott B. NAR #102949/L1 |
#4
|
||||
|
||||
BMS Coupler
2.930 OD 2.860 ID 0.035 wall thickness Semroc Coupler OD 2.918” ID 2.848" Thickness: 0.035" If you want me to show you how I was able to quickly find this sort of information PM me.
__________________
-Wolfram v. Kiparski NAR 28643 - TRA 15520 MTMA Section #606 President |
#5
|
||||
|
||||
Don't you hate it when "experts" hint and do not provide information?
https://www.erockets.biz/body-tube-sizes/ https://www.balsamachining.com/CATALOG1.asp Just google for semroc body tubes sizes or balsa machining tube sizes... Bill
__________________
It is well past time to Drill, Baby, Drill! If your June, July, August and September was like this, you might just hate summer too... Please unload your question before you ask it unless you have a concealed harry permit. : countdown begin cr dup . 1- ?dup 0= until cr ." Launch!" cr ; Give a man a rocket and he will fly for a day; teach him to build and he will spend the rest of his days sanding... |
Thread Tools | Search this Thread |
Display Modes | |
|
|