|
#1
|
|||
|
|||
FSI Mach 1 booster
I have an original FSI Dart and am cloning a sacrificial Dart to fly on a Estes E9 or E12, and I'd like to build a booster to go with both. Does anyone have a booster that they could measure know of someplace that has the specs? Short of that, I'm planning to fake it.
__________________
Bill Eichelberger NAR 79563 http://wallyum.blogspot.com/ I miss being SAM 0058 Build floor: Estes - Low Boom SST Semroc - Marauder, Shrike, SST Shuttle In paint: Canaroc Starfighter Scorpion Centuri Mini Dactyl Estes F-22 Air Superiority Fighter, Multi-Roc, Solar Sailer II, Xarconian Cruiser Semroc Cyber III Ready to fly: Estes - Solar Sailer II Semroc - Earmark |
#2
|
||||
|
||||
Bubba Bill,
I have the instructions for the FSI Dart and the Mach 1 Systems Thruster. Don't recall how I got them as I never had the model. I will scan them and post them later. Essentially, the Thruster is just a F100-0 motor that has fins and two launch lugs on it. They rounded the forward section of the booster - I am guessing they just ground it - so that it tapers toward the Dart ad its D20-12 motor. FSI catalog lists F100 dimensions as 27mm x 150mm. I have to scan to a memory card on one computer and transfer it to the better computer. Chas
__________________
Charles Russell, MSgt,USAF (ret.) NAR 9790, Lvl 1 SAM "Balls Three" Last edited by Chas Russell : 01-29-2013 at 09:45 AM. Reason: Added motor dimensions. |
#3
|
||||
|
||||
Here is a start...
Having trouble loading the second page. File may be too big, but I am not getting that error.
__________________
Charles Russell, MSgt,USAF (ret.) NAR 9790, Lvl 1 SAM "Balls Three" |
#4
|
||||
|
||||
Thruster System
__________________
Charles Russell, MSgt,USAF (ret.) NAR 9790, Lvl 1 SAM "Balls Three" |
#5
|
|||
|
|||
Thanks, Chas. That answers a couple of other questions as well. Interesting concept, but with the lack of F100's at Hobby Lobby, I guess I'll just have to wing it and build a "close enough" Mach 1.
__________________
Bill Eichelberger NAR 79563 http://wallyum.blogspot.com/ I miss being SAM 0058 Build floor: Estes - Low Boom SST Semroc - Marauder, Shrike, SST Shuttle In paint: Canaroc Starfighter Scorpion Centuri Mini Dactyl Estes F-22 Air Superiority Fighter, Multi-Roc, Solar Sailer II, Xarconian Cruiser Semroc Cyber III Ready to fly: Estes - Solar Sailer II Semroc - Earmark |
#6
|
||||
|
||||
An FSI F100 was really a 42F48 so an AT E50 is darn close to the performance.
The F100-0 used in the Mach 1 Dart kit was drilled a bit to get closer to actual zero staging delay. The stock F100-0 motors typically had a 2-4 sec delay since it is the bulkhead. I believe it is physically impossible for an FSI F100 to D20 to break Mach. However it was faster than any other kit and came close enough that the casual user would believe it did. Thank goodness we didn't have good electronics yet. It makes the magic feel more real. In re-reading those instructions it specifically says not to check continuity of the system. The M100 (electric match or Atlas match) was a low voltage igniter that a typical incandescent light continuity circuit would trigger. Interesting they presumed folks would remember that key safety tip. No lawyers in that loop! Jerry Speaking of phunnie . . . . . Sonic Boom point calculation program copyright 1983 Jerry Irvine Where to stand to hear the sonic boom! The answer is a donut shaped around the launch site. *Can't hear the boom in the hole or outside the donut. The actual reality is the donut is a different diameter and thickness vs time. Boomap.bas Copyright 1983 Jerry Irvine 5 PRINT "Program name BOOMAP.BAS * * " 7 PRINT " * * " 8 DIM E(20),F(20),G(20) 10 PRINT "PROGRAM TO DETERMINE OPTIMUM" 20 PRINT "SONIC BOOM LISTENING POSITIONS" 30 PRINT "BY MEANS OF A SONIC BOOM" 32 PRINT "FOOTPRINT MAP" 33 PRINT " * * " 34 PRINT " * * " 35 PRINT "" 40 PRINT "" 50 PRINT " * * " 60 PRINT " * * " 65 I=1 70 INPUT "ENTER NUMBER OF ROCKET POSTIONS: ",N 75 PRINT " * * " 80 INPUT "ENTER ROCKET HEIGHT (FT): ",H 90 INPUT "ENTER ROCKET VELOCITY (FT/SEC): ",V 100 INPUT "ENTER SPEED OF SOUND AT LAUNCH SITE (FT/SEC): ",C 102 A=0.0 107 A=A+0.00025 110 S=SIN(A) 120 D=1/(V/C) 130 IF S>=D THEN 150 135 GO TO 107 150 E(I)=H 160 F(I)=V/C 165 Y=TAN(A) 166 Y=Y*H 170 G(I)=Y 180 I=I+1 190 IF I>N THEN 198 195 PRINT " * * " 196 GO TO 80 198 PRINT " * * " 200 PRINT "HEIGHT(FT) * MACH N0 * DISTANCE FROM LAUNCHER" 210 PRINT "---------------------------------------------" 220 FOR I=1 TO N 230 PRINT E(I),F(I),G(I) 240 NEXT I 250 END Install your own line feeds and find a BASIC interpreter. Last edited by Jerry Irvine : 01-29-2013 at 03:17 PM. |
#7
|
|||
|
|||
Quote:
I posted a RockSim of a Mach-1 Dart with the booster and I can check my PC at home for the file. I built a few boosters back in the day to resemble the thruster. An example is here with a few notes on how I made this one with Semroc parts: http://forums.rocketshoppe.com/show...67&postcount=85 I will get the dimensions I used. Should be close to the F100 dimensions Chas posted only made from Semroc FSI equivalent tubing. When Estes releases the F booster motor I'll be building more of these ... .
__________________
Steve Naquin TRA# 677 L2 NAR# 85518 L2 SAM# 0052 🚀 In Construction: Der Blue Maxx/Minie-Magg 5.5” & Vander-Burn MDRM Clone w/Stickershock23 Custom Decals 🚀 In Paint & Detail: USR Banshee 🚀 In Build Queue: Estes Doorknob w/Vander-Burn Rocketry Upgrade Kit [Sport Decor], Semroc Centurion-F, Semroc Egg Crate 🚀 In Repair: SLS Lil’ Hustler, SLS Aero-Dart 1969 Trim 🚀 Stay Tuned For Fall 2021 Launch Dates |
#8
|
|||
|
|||
Quote:
Bill, Sorry for the delay in getting back to you with this ... hope I didn't delay your build any It seems that since I got an iPad for Christmas I don't seem to be turning on my PC at home much anymore and haven't been much in the RockSim program lately. I found three old files on my PC ... two I last saved on 5/10/2005 and the most recent using SEMROC equivalent tubing I last saved on 1/4/2009. It's been a while since I've cloned one of these but certainly looking forward to the new Estes motors to revisit the designs. The booster length I used for the one that I posted pictures of in this thread I have a note in my RockSim file that for the SEMROC ST-7100 tube I used for the booster I cut to 6.10" long (just a little over the 150mm that Chas mentioned in his post). I made the motor mount tube that I centered inside the ST-7100 just a little longer than that so I could round a little on the front side between the inner motor mount tube and the outer ST-7100 with glue to create the rounded end that FSI used on the Thruster F100-0 motors. You can see this if you look close at the pictures. I built it up with a small bead of epoxy. Come to think of it epoxy clay would probably work well to form that. I remember the Dart you picked up. I saw that on eBay. Isn't that the one that came from the teachers collection at a school or something? .
__________________
Steve Naquin TRA# 677 L2 NAR# 85518 L2 SAM# 0052 🚀 In Construction: Der Blue Maxx/Minie-Magg 5.5” & Vander-Burn MDRM Clone w/Stickershock23 Custom Decals 🚀 In Paint & Detail: USR Banshee 🚀 In Build Queue: Estes Doorknob w/Vander-Burn Rocketry Upgrade Kit [Sport Decor], Semroc Centurion-F, Semroc Egg Crate 🚀 In Repair: SLS Lil’ Hustler, SLS Aero-Dart 1969 Trim 🚀 Stay Tuned For Fall 2021 Launch Dates |
#9
|
|||
|
|||
Not a problem. I finished the Dart, but like everything else I've built since October, it's sitting nekkid waiting for the weather to allow me some painting time. I actually did have a day last week when it got up close to 70, but the backlog is such that all I was able to do was get the FSI Maverick sprayed with a base coat of yellow, the Agressor DF-15B resprayed to cover the damage caused when I added nose weight, and the FSI Echo-1 sprayed with a primer coat. The next day it started raining and the temps took a nose dive. Just when B6-4 Field was about flyable, too.
I was looking for the actual FSI Dart tonight. I was going to post a side by side pic of the original and my clone because I think the original is shorter, likely due to some flight damage. Can't seem to figure out where I've got it stashed. Thanks for the info. This one isn't going to be a B6-4 Field bird anyway, so I've got some time before I have to think about getting things in RTF shape. I'm dying to get to the big field, but life and the weather have been dealing me lousy hands since November, and I don't see my shadow. (Or is it that I see my shadow? I can never keep that straight. )
__________________
Bill Eichelberger NAR 79563 http://wallyum.blogspot.com/ I miss being SAM 0058 Build floor: Estes - Low Boom SST Semroc - Marauder, Shrike, SST Shuttle In paint: Canaroc Starfighter Scorpion Centuri Mini Dactyl Estes F-22 Air Superiority Fighter, Multi-Roc, Solar Sailer II, Xarconian Cruiser Semroc Cyber III Ready to fly: Estes - Solar Sailer II Semroc - Earmark |
Thread Tools | Search this Thread |
Display Modes | |
|
|