#1
|
||||
|
||||
Using Up A8-3s
Happy 2020,
Since I have a bunch of A8-3s, I decided to build a bunch of BT-20 rockets to use the bunch. I am cloning Estes Sprites and Centuri Vector-Vs along with RDC moon-glo kits. Astrosaint |
#2
|
|||
|
|||
Quote:
Wizards, Vikings and Sky Hooks are also great A8-3 birds.
__________________
Bill Eichelberger NAR 79563 http://wallyum.blogspot.com/ I miss being SAM 0058 Build floor: Centuri Mini Dactyl Estes - Low Boom SST Semroc - Marauder, Shrike, SST Shuttle In paint: Canaroc Starfighter Scorpion Estes F-22 Air Superiority Fighter, Multi-Roc, Solar Sailer II Semroc Cyber III Ready to fly: Estes - Solar Sailer II Semroc - Earmark, Groonie Der V 1/2 |
#3
|
||||
|
||||
Build a cluster rocket in addition to all those little minimum diameter birds. A pair of A8's will give you a good approximation of the fabled B14. If all you have are 3 second delays, the rocket will need to be fairly heavy. You could do something like a long Bertha or move up in diameter if you don't like tall rockets. In other words, any rocket that you've flown on a B6-4 and thought a B6-2 would be better, that's a good size for the twin A8-3. It's perfect for larger demos on small fields if you ever do anything for a school, scouts, or church and the field size is limited.
__________________
I love sanding. |
#4
|
||||
|
||||
Quote:
Greetings: Well, I inherited about a 1,000 of these little motors from a closed out rocket education program. I gave out 2/3 of them for free to deserving kids and adults and will use the rest. They were all Pistco samples. I have done clusters but ignition using the new starters is a question mark these days. [IMG][IMG]Atlee.gif[/IMG][/IMG] [IMG][IMG][SPRITE 20[/IMG][/IMG] |
#5
|
||||
|
||||
Quote:
I do clusters with up to 4 motors all the time. The modern "starters" are no problem. Just make sure they are not damaged and use a 12v source instead of these little 6v or 9v Estes and Quest systems. If you are still paranoid about them, you can dip/paint them in nitrocellulose lacquer (nail polish). A visual inspection and individual continuity check will go a long way in successful clustering with modern "starters". Cheap lawnmower batteries, gel cells, etc are good, even when they won't kick over an engine anymore. BTW, I've got a big stash of A8-3's and C6-7's from Walmart closeouts over the years. I've done a bunch of C6-7 clusters because of that. Three C6-7's give you that D20 (actually a baby ~E15 with a peak thrust of about 45N) that a lot of people want Estes to produce.
__________________
I love sanding. |
#6
|
|||
|
|||
I'm in the same boat. I have about 500 of them that I need to use up. I looked at Quest and Custom and found a number of interesting rockets to burn up some A8-3 and A8-5's
I'm also in the painting stages of building a Semroc Ranger clone from a Big Bertha but added the 3 motor cluster. Should fly nicely on a trio of A8-3's . |
#7
|
||||
|
||||
Quote:
Host the Cub Scouts at a launch. Hand out the A8-3s like candy.
__________________
-Wolfram v. Kiparski NAR 28643 - TRA 15520 MTMA Section #606 President |
#8
|
||||
|
||||
Quote:
I dip the new starters in nitrocellulose lacquer. I bought a pint can from Firefox Enterprises, but used to make my own by dissolving ping pong balls in acetone. You want the dip “syrupy” thick so it clings, and not run. I have dipped them “as-is”, and they work very well, but now prefer to soak in water for 30-45 minutes to partially dissolve the clear coating on the tip. It will loosen up and easily wipe off, leaving the bare nichrome bridge wire. This gives a direct contact between wire and coating. Dip in the NC lacquer to lightly coat the tip. Too heavy, and they may not fit in the nozzle. I hang them tip down to dry by taping them to the edge of a shelf over my workbench. At ignition you”ll get a nice flame, rather than just a glowing wire. I have not had any issues with ignition using dipped starters.
__________________
Lee Reep NAR 55948 Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor In the Paint Shop: Nothing! Too cold! Launch-Ready: Farside-X, Maxi Honest John, Super Scamp Last edited by LeeR : 02-06-2020 at 06:37 PM. |
#9
|
|||
|
|||
Quote:
I've started dipping all of my Estes igniters in Testors Silver paint. Nothing fancy, Just dip and let dry. Haven't had a failure since. |
#10
|
||||
|
||||
Quote:
Three A8-3's will give you about a C30-3 with about 7Ns. Mortar shot. .
__________________
I love sanding. |
Thread Tools | Search this Thread |
Display Modes | |
|
|