I started the build of a cool old kit, the Scorpius (Estes #1375).
I was in rocketry hiatus when this one came out in 1982. This one definitely has a Star Wars vibe going for it. It needs a new main tube, but the rest of the kit is fine. The decals are in excellent condition.
I’ll be sending the instruction and decal scans to James Zalewski. Jim is going thru many of his archives to add better scans.

This kit uses the PNC-50X nose cone. I have already set aside a PNC-60X (used on the Sprint XL) for an upscale after this build is done.

Attached Thumbnails

 

__________________
Lee Reep
NAR 55948

Projects: Semroc Saturn 1B, EAC Firecat (Mini HoJo bash), Scorpius, DBRM
In the Paint Shop: Nothing! Too cold!
Launch-Ready: Farside-X, Maxi Honest John, Super Scamp

Morerockets.com offers a clone of this kit and a BT-60 based "super" version also.
I have all three.

__________________
When in doubt, WHACK the GAS and DITCH the brake !!!

Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't !
Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY.

I’ve seen the offerings, and heard positive reviews of their kits. Maybe I should see if they are willing to sell the upscale kit decals, although the decals are not too complex, and I will probably try to do cut vinyl on my Cricut.

__________________
Lee Reep
NAR 55948

Projects: Semroc Saturn 1B, EAC Firecat (Mini HoJo bash), Scorpius, DBRM
In the Paint Shop: Nothing! Too cold!
Launch-Ready: Farside-X, Maxi Honest John, Super Scamp

I definitely will use basswood on the upscale. I pretty much use it on anything scratch-built unless it’s a small rocket, but most of my scratch-builds are BT-55 or larger size.

__________________
Lee Reep
NAR 55948

Projects: Semroc Saturn 1B, EAC Firecat (Mini HoJo bash), Scorpius, DBRM
In the Paint Shop: Nothing! Too cold!
Launch-Ready: Farside-X, Maxi Honest John, Super Scamp

I did this BT50 Morerockets Scorpius last year. It's definitely a balsa cone and I replaced the balsa fin parts with basswood. The decals that cam with t he kit were very nice.

Attached Thumbnails

       

__________________
Never trust an atom. They make up everything.

4 out of 3 people struggle with math.

Chemically, alcohol IS a solution.

NAR# 94042
SAM# 0078

Jeff,

Excellent job! Funny that the Morerockets kit has a balsa cone, and my Estes kit has plastic.

I started the process to seal the balsa pieces before assembly, as per instructions. The fins and other parts are so close that sanding them after attachment would be a real pain. Unfortunately, the parts were not intact on the balsa sheet, so sealing eight little pieces is quite a long process. But, I am in no hurry.

__________________
Lee Reep
NAR 55948

Projects: Semroc Saturn 1B, EAC Firecat (Mini HoJo bash), Scorpius, DBRM
In the Paint Shop: Nothing! Too cold!
Launch-Ready: Farside-X, Maxi Honest John, Super Scamp

Hi Everyone!:

All those scorpius' are looking GOOD! Anybody know what diameter and length the dowels used on this kit are? I would assume that the balsa for the fins is the traditional 3/32".

Sincerely,
J.W.

Definitely a cool design, and sold during my hiatus time too. Well, it was a fairly long hiatus, nearly 30 years!

__________________
Paul
If we weren't all crazy, we would go insane - Jimmy Buffett
NAR #87246 www.wooshrocketry.org