Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Work Bench > 3D Printing Asylum
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-07-2021, 12:41 PM
Jack Hydrazine Jack Hydrazine is offline
Craftsman
 
Join Date: May 2011
Posts: 246
Default BT-5 to BT-50 Transition 3D Model

In the continuing 3D-modeled series of transitions this one is the BT-5 to BT-50 transition that will fit Estes BT-5 and BT-50 airframe tubing.

The distance between the two sizes of tubes (transition taper length) is 1.0 inch (25.4mm).

There are four models:
1) Solid,
2) Solid with a 3.2mm hole to allow for screw eyes to be fastened to it,
3) Hollow,
4) Hollow with end caps.

You can download these models for free from Thingiverse and print them on our 3D printer.
https://www.thingiverse.com/thing:4927099
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 02:31 PM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2024