#1
|
||||
|
||||
Estes Corsair #1999 Tail Cone
Ventured to make the tail cone for the Corsair with Microsoft 3D Builder, which is not the best program for 3D modeling but it is the one I know how to use for now. Based it on pictures found on this forum. The STL rendering is not the best as the surface does not look smooth. I have not ventured to print any of these files as my printer is down (clogged nozzle).
If anyone prints the file post your results. If I learn another 3D modeling app I may give this a try again. Enjoy!!! - Raul
__________________
_____________________ - Raúl NAR #88644 SAM #230 EAC CAT _____________________ |
#2
|
||||
|
||||
Estes Corsair #1999 Tail Cone with Integrated Launch Lug
Toyed with the idea of incorporating a launch lug to the tail cone and here it is. The LL is for a 1/8 inch rod.
And I forgot to mentioned that the tail cone (both versions) are for 3/32 inch thick fins. The fins would have to be modified to have tabs to be glued to the internal BT-20. Enjoy! - Raul
__________________
_____________________ - Raúl NAR #88644 SAM #230 EAC CAT _____________________ |
#3
|
||||
|
||||
Advance Tail Cone
...and something else I was toying with, an "advance" version of the tail cone. Not ready to post the STL yet but wanted to share.
- Raul
__________________
_____________________ - Raúl NAR #88644 SAM #230 EAC CAT _____________________ |
#4
|
||||
|
||||
Thrilled to see this modeled, Corsair is a classic.
|
#5
|
||||
|
||||
Here's a print I did of it. It required some fiddling to get all of the scaffolding out of the interior but I was pleasantly surprised that it didn't fall apart. I'm going to sand-xtc3d-sand it and eventually hopefully use it in a Corsair build.
|
#6
|
||||
|
||||
Quote:
You are my hero!!! I have plans to print it soon but my printer was out of service. Now that I have a new power suply that is going to be the first thing printed. Thanks for sharing.
__________________
_____________________ - Raúl NAR #88644 SAM #230 EAC CAT _____________________ |
Thread Tools | Search this Thread |
Display Modes | |
|
|