#1
|
||||
|
||||
Estes Dark Star #2045
Does anyone have a scan of the decal sheet of the Estes Dark Star #2045?
Thanks!
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 |
#2
|
|||
|
|||
I remember this one now, shiny Gold, impossible to get a decent scan of.
Attached is the best I could get. |
#3
|
||||
|
||||
Thank you! Dang—that one looks like gold aquarium gravel.
VR, Jeff
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 |
#4
|
||||
|
||||
Does anyone have an actual size pattern of the Dark Star fin? The patterns I have seem to be either too small, too large, or WAY too large.
Thanks! VR, Jeff
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 |
#5
|
|||
|
|||
Quote:
Did you try the one on my site? https://www.oldrocketplans.com/este...045/est2045.htm
__________________
Scott D. Hansen Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe! Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies! Ye Olde Rocket Forum WOOSH NAR Section #558 |
#6
|
||||
|
||||
Quote:
Yes, but it prints out huge. Since there's no reference scale with it I don't know what the size actually should be. VR, Jeff
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 |
#7
|
||||
|
||||
This how it prints out on an 8 1/2" x 11" sheet.
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 |
#8
|
|||
|
|||
Make sure that your printer is set to 300dpi. It should look something like the attachment.
__________________
Web Site and Blog https://rocketryjournal.wordpress.com YouTube Channel https://www.youtube.com/@AustinAerospace 3D Printing Designs https://www.thingiverse.com/austin_aerospace_education Software https://sourceforge.net/u/austinaerospace/profile |
#9
|
||||
|
||||
Quote:
OK, I think I have it sized correctly now. I have a leading edge of 5.25" long. Is that correct?
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 |
#10
|
|||
|
|||
Not at home so I can't print it out and measure it. But according to the graphics program I am using, at 300 dpi the leading edge is just over 5-inches (5.1) in length. FYI - The 300 dpi is embedded in the TIF meta data.
Hope that helps.
__________________
Web Site and Blog https://rocketryjournal.wordpress.com YouTube Channel https://www.youtube.com/@AustinAerospace 3D Printing Designs https://www.thingiverse.com/austin_aerospace_education Software https://sourceforge.net/u/austinaerospace/profile |
Thread Tools | Search this Thread |
Display Modes | |
|
|