Does anyone know where I can find this stuff? It’s outta stock at erockets and I’m stumped as to where else one might find it.

TIA

ST-13 is 34.6mm OD.

The closest I have been able to find is Quest 35mm body tube.

__________________
Bob
S.A.M. # 0014

Thanks Bob. That’ll probably work.

Btw I am posting some way odd parts at the other forum. You might pop in.

ST-13 has been unavailable for quite some time.

__________________
When in doubt, WHACK the GAS and DITCH the brake !!!

Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't !
Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY.
ALL systems are GO for MAYHEM, CHAOS, and HAVOC !

Along with ST-7

__________________
Andrew A
NAR 33674
SAM 0139

Semroc had it.

eRockets lists several (Semroc legacy), but the longer tubes are all out of stock. Some shorter ones are available.

https://www.erockets.biz/st-13/

__________________
Contest flying, Sport flying, it's all good.....
NAR# 18723 NAR.org
GeorgesRockets.com
Georges'CancerGoFundMe:
https://www.gofundme.com/f/help-geo...ay-fight-cancer

It is heavy duty tube for Enerjet clones but LT-125 has that OD:https://www.erockets.biz/semroc-bod...0-discontinued/

But if one wanted to use a ST-13 nose, or old old Egg Crate payload section, or an old Astrocam (which IIRC used the ST-13 sized tube instead of BT-55), the inside diameter would be too small. Also, would need custom centering rings.

Although if a person had an old slide-on plastic fin unit, then that tube would work (albeit the nose cone issue).

__________________
Contest flying, Sport flying, it's all good.....
NAR# 18723 NAR.org
GeorgesRockets.com
Georges'CancerGoFundMe:
https://www.gofundme.com/f/help-geo...ay-fight-cancer

I would slice off the NC shoulder and glue in the LT-125 balsa coupler if they are still available. I have a couple of old AAA kits that use that method.