#1
|
||||
|
||||
AeroTech Announces 38mm RMS-EZ™ Reloads at LDRS-32
7/18/2013
AeroTech Announces 38mm RMS-EZ™ Reloads at LDRS-32 AeroTech introduced the first offerings in its new “RMS-EZ” line of adjustable delay and ejection Reloadable Motor System™ rocket motor reloading kits at the Tripoli Rocketry Association (TRA) LDRS-32 launch near Gerlach, NV. RMS-EZ reloads include a new, molded modular bulkhead featuring a preinstalled delay grain that eliminates the previous assembly of six separate components in AeroTech’s legacy RMS reload kits. This significantly reduces motor assembly time and eliminates a substantial risk of user error. The first reloads to be offered in the line include the I161W-14A, I357T-14A (fits RMS-38/360 hardware) and I211W-14A (fits RMS-38/480 hardware). The RMS-EZ motor design uses existing RMS motor cases and aft closures, and the forward retaining ring from the RMS spacer system. Standard and plugged RMS forward closures cannot be used with the RMS-EZ reloads, however the spacer tube and “anchor” retaining ring components of the spacer system are completely compatible with the new design. For a limited time, AeroTech is offering a free retaining ring to each customer who purchases one or more RMS-EZ reloads. The 38mm RMS-EZ system is TRA certified and may be purchased by flyers possessing an appropriate NAR or TRA user certification. There is no price increase over the previous version of the reloads. The as-supplied time delay of RMS-EZ reloads may be shortened in 2-second increments using AeroTech’s Universal Delay Drilling Tool™ (UDDT™), which is also being provided free of charge to each customer who purchases one or more DMS™ single use motors or RMS-EZ reload kits (one free tool to a customer, please). A generous ejection charge, FirstFire™ igniter and a new, internally installed vinyl ejection cap are also supplied with the new reloads. The user as part of the motor assembly process dispenses the ejection charge as needed into the RMS-EZ bulkhead for the particular rocket being flown. RMS-EZ reload kits are packaged in a distinctive yellow shipping tube with AeroTech logos printed on the outer spiral wrapping. Motor data including a sample time-thrust curve are printed on a label that is applied to the outside of the tube for easy identification and performance evaluation by the flyer. Caps on the ends of the tube are secured externally and are easy to remove. Additional RMS-EZ reload kits are under development including those in 29mm and 54mm diameter. RMS-EZ motors are ideal for inexpensive Level 1 & 2 certifications and for general sport flying. RMS-EZ modular bulkheads will be made available separately for retrofitting AeroTech’s legacy reloads. The RMS-EZ motor design and the Universal Delay Drilling Tool are patent pending.
__________________
For warranty questions & issues please contact Karl at warranty@aerotech-rocketry.com For customer service questions & issues please contact Jenn at customerservice@aerotech-rocketry.com AeroTech Consumer Aerospace Division of RCS Rocket Motor Components, Inc. 2113 W 850 N Cedar City, UT 84721 435-865-7100 (Ph) 435-865-7120 (Fax) http://www.aerotech-quest.com http://www.rocketmotorparts.com.com http://www.specificimpulse.com Last edited by AeroTech : 08-02-2013 at 10:29 PM. |
Thread Tools | Search this Thread |
Display Modes | |
|
|