#41
|
||||
|
||||
To the best of my knowledge, the large Enerjet decal was only on one side.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, and HAVOC ! |
#42
|
|||
|
|||
Looks great. Time for a flight!
|
#43
|
||||
|
||||
Quote:
When my next shipment from eRockets arrives, I will get the original Enerjet decals I scored from eBay. I can't wait to scan them with a ruler to ensure the scaling is correct.
__________________
. . Dreaming of making the rockets I dreamed of as a kid (and then some). "The Guide says there is an art to flying", said Ford, "or rather a knack." "The knack lies in learning how to throw yourself at the ground and miss." Launching is Optional... Landing? That Depends on Trees. Last edited by K'Tesh : 06-14-2019 at 10:50 PM. |
#44
|
||||
|
||||
I just cleaned up these (http://plans.rocketshoppe.com/decals/Enerjet_Decals.tif) and printed them on clear water slide inkjet decal paper then used one nice coat of KRYLON Crystal Clear # 1303.
__________________
Bruce S. Levison, NAR #69055 |
#45
|
||||
|
||||
Quote:
Post the file? |
#46
|
||||
|
||||
The attached .jpg file is the Enerjet decal I cleaned up using Microsoft paint. I used a print from this file on my 1340 clone. Note this is a low resolution file created from the original .tif file which was made at 600dpi , some detail has been lost and the edges appear fuzzy.
__________________
Bruce S. Levison, NAR #69055 |
#47
|
|||
|
|||
Is the STL file for the 1340 nose cone posted on Thingiverse? If not, could you post it? Thanks!
It looks to me like a 5:1 rounded ogive. |
#48
|
||||
|
||||
See attached .obj files for 1340 nose cone and coupler. I created these files with RockSim and 3D printed them using ABS and both parts both fit the LT-125 tubing that I have. If you need these files for Centuri ST-13 tubing or BT-55 just let me know.
__________________
Bruce S. Levison, NAR #69055 |
#49
|
|||
|
|||
Thanks! I appreciate that greatly!
|
#50
|
||||
|
||||
Picture of my 1340/20 clones; homemade decals and 3D printed ABS fin cans, transitions and nosecones. Might fly these at NARAM this week if I ever get there.
__________________
Bruce S. Levison, NAR #69055 |
Thread Tools | Search this Thread |
Display Modes | |
|
|