#1
|
||||
|
||||
Estes USS Andromeda Plan Template.
Currently I'm looking at cloning the Estes USS Andromeda. I pulled the plans from JimZ's site. Looking at the plans from JimZ's site there is no template for the die cut balsa parts. From everything in the plans looks like I can make templates for everything except the "antenna platform", which I could guess at, but would rather not. Does anyone have a scan of the die cut balsa parts? Thanks.
__________________
Have a good day Bob NAR 77103 |
#2
|
||||
|
||||
Quote:
There is a "line drawing", identified as http://www.dars.org/jimz/estes/est1273k.tif, for the "Antenna Platform" and for the "Conduit Standoff" on JimZ site. These were likely drawn from a kit that had been assembled, so the dimensions are probably as accurate as the part they were measured from.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#3
|
||||
|
||||
You're correct, there it is. I stand corrected. Thank you!!!!!!
__________________
Have a good day Bob NAR 77103 |
Thread Tools | Search this Thread |
Display Modes | |
|
|