#11
|
||||
|
||||
Quote:
But yes, the two canards show up quite clearly. I also see a couple of exterior fins attached horizontally on the ring fin. Quote:
.
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#12
|
|||
|
|||
Quote:
Thanks Chris Timm for the additional info. Very interesting indeed!
__________________
Steve Naquin TRA# 677 L2 NAR# 85518 L2 SAM# 0052 🚀 In Construction: Der Blue Maxx/Minie-Magg 5.5” & Vander-Burn MDRM Clone w/Stickershock23 Custom Decals 🚀 In Paint & Detail: USR Banshee 🚀 In Build Queue: Estes Doorknob w/Vander-Burn Rocketry Upgrade Kit [Sport Decor], Semroc Centurion-F, Semroc Egg Crate 🚀 In Repair: SLS Lil’ Hustler, SLS Aero-Dart 1969 Trim 🚀 Stay Tuned For Fall 2021 Launch Dates |
#13
|
||||
|
||||
Roughing it out in Rocksim 10
Quote:
Late this afternoon, I remembered the "ringtail" option, which seemed to actually work. Now this evening, I've done about all I can do, so here's the roughed out mockup. I used the Semroc BNC-50BC from my Estes Wolverine 0816 clone (13mm), while substituting a 15" long Semroc ST-9 body tube for the Estes BT-50, but I used a 1.25" long BT-80 for the ring fin. I plan to upscale this to BT-55, which means I'll need to fabricate the resulting ring fin. Please post any comments you might have. Thanks in advance! .
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#14
|
|||
|
|||
Appear to be a total of 6 fins in the ring, with two extending outside the ring horizontally. That black piece hanging down in the picture while on the transport dolly may be the mount used to attach the Missile to the F4U wing.
Allen |
#15
|
|||
|
|||
Quote:
__________________
Steve Naquin TRA# 677 L2 NAR# 85518 L2 SAM# 0052 🚀 In Construction: Der Blue Maxx/Minie-Magg 5.5” & Vander-Burn MDRM Clone w/Stickershock23 Custom Decals 🚀 In Paint & Detail: USR Banshee 🚀 In Build Queue: Estes Doorknob w/Vander-Burn Rocketry Upgrade Kit [Sport Decor], Semroc Centurion-F, Semroc Egg Crate 🚀 In Repair: SLS Lil’ Hustler, SLS Aero-Dart 1969 Trim 🚀 Stay Tuned For Fall 2021 Launch Dates |
#16
|
||||
|
||||
The Vought "PA-6" is also known as the Vought "V-353 PA-VI "
Dave F. |
Thread Tools | Search this Thread |
Display Modes | |
|
|