#1
|
||||
|
||||
Ring tail design
I've been working on a design along the lines of the old flying stovepipe(?) and can't get rocksim to give me anything "stable".
I know the design works as I string tested it and have flown the design a half dozen times, but when I enter it in RockSim, it shows unstable.
__________________
Bernard J. Herman Ohio RLS Starport Sagitta Rockets email bherman@sagittarockets.com NAR # 97971 SR What's your idea on the best way to change Washington D.C.? Let us know at the Cantina Sagitta Cantina We're looking for a few good Catos, please tell us about any you may have had. Survey of Anecdotal Malfunctioning Engines or S.A.M.E. |
#2
|
||||
|
||||
Quote:
Ring tails and RockSim have never quite gotten along together for several iterations of the program. RS shows a higher drag value, for one thing, and definitely doesn't calculate RTs the same as primary tubes. Jay Goemmer (CenturyGuy) might be able to pass along some comments, as this was an issue with his "Tau Zero" design.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#3
|
||||
|
||||
I tried removing the ring and just using the fin supports and it comes out okay.
I'm not adverse to designing them the old fashioned way, but it seems like you need to have a RS file on it or people panic.
__________________
Bernard J. Herman Ohio RLS Starport Sagitta Rockets email bherman@sagittarockets.com NAR # 97971 SR What's your idea on the best way to change Washington D.C.? Let us know at the Cantina Sagitta Cantina We're looking for a few good Catos, please tell us about any you may have had. Survey of Anecdotal Malfunctioning Engines or S.A.M.E. |
#4
|
||||
|
||||
People who are familiar with RockSim know that it cannot handle either tube fins or ring fins, yet many perfectly stable tube-finned and ring-finned rockets have been designed and built in the past 53 years. RS is a program that applies a set of equations to approximate the static and dynamic stability of a rocket design. Stability equations are approximations, not absolute truths. They have their limitations and problems and are still unable to accurately model the fluid dynamics of certain shapes. Anyone who views simulation results needs to understand that.
__________________
Mark S. Kulka NAR #86134 L1,_ASTRE #471_Adirondack Mountains, NY
Opinions Unfettered by Logic • Advice Unsullied by Erudition • Rocketry Without Pity
|
#5
|
||||
|
||||
Have you tried the ring tailed design under Rocksim 9?
__________________
Gravity is a harsh mistress SAM 002 NAR 91005 "The complexity of living is eminently favored to the simplicity of not." |
#6
|
||||
|
||||
Some sort of ring-tail or tube fin design has been around for a long time... it makes me wonder what the hold up for implementing these design variations has been with the programmers. I have designed and flown two variations on a 4ST/FNC ('Slanted Tube/Fin + Nose Cone') and they both perform very well! I'd love to be able to RockSim these designs...
__________________
-Brain SKY AYE ROCKETRY Follow Your Impulse! |
#7
|
||||
|
||||
Quote:
The design above is indeed stable and the pylon definition is pretty reasonable to specify. Also the Tau Zero has been modelled effectively. Which version and build are you using (118)? I would imagine that the changes adding pods in 9 should have some impact on the calculations - specifically drag components off the main tube.
__________________
Gravity is a harsh mistress SAM 002 NAR 91005 "The complexity of living is eminently favored to the simplicity of not." |
#8
|
||||
|
||||
Quote:
I looked at it, but could not find the factor which made the difference. My design is a minimum diameter, which to me would suggest that without the weight of the engine mount et al., I should have a better stability margin. I am not unfamiliar with some of RockSim's quirks, http://www.apogeerockets.com/educat...wsletter253.pdf , and I think it is a great aid to designing and building model rockets. As I mentioned previously though, some think that if it's not stable in RockSim, it won't work and you shouldn't fly it. In other words, flight tests be ****ed, let's see the calcs! While I don't adhere to this philosophy and was designing rockets long before there was a computer program to "do the calcs.", there are some in today's (younger) society who follow technology blindly and don't understand the age old concepts of trial and error and professional judgement. Anyway, enough of my rambling, I was just wondering if there was anyone who may have come across this problem before and could offer a fix or go around.
__________________
Bernard J. Herman Ohio RLS Starport Sagitta Rockets email bherman@sagittarockets.com NAR # 97971 SR What's your idea on the best way to change Washington D.C.? Let us know at the Cantina Sagitta Cantina We're looking for a few good Catos, please tell us about any you may have had. Survey of Anecdotal Malfunctioning Engines or S.A.M.E. |
#9
|
||||
|
||||
Quote:
Yes, version 9, build 118. It's not that I can't get a ring tail to work, it's just one that I know works shouldn't according to RockSim.
__________________
Bernard J. Herman Ohio RLS Starport Sagitta Rockets email bherman@sagittarockets.com NAR # 97971 SR What's your idea on the best way to change Washington D.C.? Let us know at the Cantina Sagitta Cantina We're looking for a few good Catos, please tell us about any you may have had. Survey of Anecdotal Malfunctioning Engines or S.A.M.E. |
#10
|
||||
|
||||
Quote:
Quote:
In an actual analysis - way beyond my skills - none of my EE courses dealt with aerodynamics - there will be interfering turbulence between the supports and the ring which will create extra drag. And it will impact the effectiveness of the ring and fins. But I'm not sure that that is destabilizing - I think the added drag helps with stability. That is, the drag will improve stability while the turbulence reduces it for a net push. Also, if the anular radius between the airframe and the ring is small, that will further impact the airflow and hence the stabilizing effects. So you want a ~1/2" or more of space between the airframe and the ring to ensure air is getting inside the ring. Anyway, that's my two cents on ring fins I've pretty much used the same sort of approximation for tube fins as well. Doug .
__________________
YORF member #11 |
Thread Tools | Search this Thread |
Display Modes | |
|
|