#1
|
||||
|
||||
3D files for Jets
Can anybody steer me to some 3D files to use for Centuri-type jet rockets?
|
#2
|
||||
|
||||
__________________
_____________________ - Raúl NAR #88644 SAM #230 EAC CAT _____________________ |
#3
|
||||
|
||||
Quote:
I saw those files and like them, but I was hoping someone had the STL file for the sidewinder. It was nice to go back and read your build thread for the F-16. I'm using Odd rock F-16 and combining some of Centuri's F-16 parts. |
#4
|
|||
|
|||
Get me some good pics or measurements and I can make a reasonable facsimile.
|
#5
|
||||
|
||||
Quote:
I'm sorry scott but I have no idea how to get those measurements, maybe rosko_racer might know how to do that. Thanks for your offer. |
#6
|
||||
|
||||
Quote:
That is the newer style of missiles for later models. The Centuri Fighter Fleet had missiles with no fins on the tip. I used to have a set just like those on the picture but I cannot access them at this time. Request to the bigger rocketry audience: If you have a set of these tips, can you measure the rectangular part of the tip fins (length x height x width)? I am not trying to make an exact copy of the originals but something anyone with a 3D printer can work with. If you want to go "above and beyond" the call, then post measurements for the tip and tail of this Sidewinder set. Right now I am working on modifying the STL files I used to make the ones for my F-16. r_r
__________________
_____________________ - Raúl NAR #88644 SAM #230 EAC CAT _____________________ |
#7
|
|||
|
|||
Is this what you are looking for?
__________________
Web Site and Blog https://rocketryjournal.wordpress.com YouTube Channel https://www.youtube.com/@AustinAerospace 3D Printing Designs https://www.thingiverse.com/austin_aerospace_education Software https://sourceforge.net/u/austinaerospace/profile |
#8
|
||||
|
||||
Bob Austin, yes that's what I could use. I'm just looking for an STL file that I can for a wingtip or under the wing rockets that I can mount on either size of launch lugs.
|
#9
|
|||
|
|||
Well, its definitely Friday the 13th!
I pulled out my digital caliper to get some measurements and the battery died (an LR44). Will see if I can get a battery tomorrow and then take some measurements and post them here. Sorry for the delay. Hope that helps.
__________________
Web Site and Blog https://rocketryjournal.wordpress.com YouTube Channel https://www.youtube.com/@AustinAerospace 3D Printing Designs https://www.thingiverse.com/austin_aerospace_education Software https://sourceforge.net/u/austinaerospace/profile |
#10
|
||||
|
||||
A picture (or pictures) that show the profile of the fins of both, the tip and the tail, with a ruller for scale, would work for me. I also await for the measurements Bob Austin will provide later. It will help me work on what I have. I am not shooting for perfection but like I said before, make a close copy that The Mole could use if he wanted.
V/R, r_r
__________________
_____________________ - Raúl NAR #88644 SAM #230 EAC CAT _____________________ |
Thread Tools | Search this Thread |
Display Modes | |
|
|