#1
|
|||
|
|||
29mm Motor Mount
So, I went to the Estes site to maybe get part numbers for 29mm motor mount and, alarm, surprise, they don’t sell one or any parts to aid in making one. That’s strange since they sell rockets that fly on 29mm motors that they make!
Odd. Disappointing. Grumble. Grumble. Grumble. |
#2
|
||||
|
||||
Quote:
Looks like Estes may have something coming… |
#3
|
|||
|
|||
Here's a better picture.
Your wish may come true very shortly.
__________________
I like the unusual, the off beat, the avant-garde. No 3/4 FNC for me! |
#4
|
|||
|
|||
Quote:
eRockets is your buddy.
__________________
Bill Eichelberger NAR 79563 http://wallyum.blogspot.com/ I miss being SAM 0058 Build floor: Estes - Low Boom SST Semroc - Marauder, Shrike, SST Shuttle In paint: Canaroc - Starfighter Scorpion Centuri - Mini Dactyl Estes - F-22 Air Superiority Fighter, Multi-Roc, Solar Sailer II, Xarconian Cruiser Semroc - Cyber III Ready to fly: Estes - Solar Sailer II Semroc - Earmark |
#5
|
||||
|
||||
The parts supply offerings from Estes have been a “tad incomplete” for years, and especially the PS II parts. Sometimes you could get a body tube, nose cone, and coupler. Often not all three. It usually requires checking back to see if any particular item just happens to arrive back in stock.
As Bill said, “eRockets is your buddy”. I have tended to buy tubes and nose cones from Estes that were used in kits like the Mega Der Red Max (and those are listed again, when I looked them up a few days ago). There have also been pretty good assortment of the 2” and 2.5” parts. But, I do not recall ever seeing centering rings for PS II, but I make my own. And for motor tubes, I typically use eRockets or BMS.
__________________
Lee Reep NAR 55948 Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor In the Paint Shop: Nothing! Too cold! Launch-Ready: Farside-X, Maxi Honest John, Super Scamp |
#6
|
|||
|
|||
Yes,
Interesting timing that I would complain about it and the same day an email announcing the parts arrives. Hmmmm. |
#7
|
|||
|
|||
Quote:
I have gotten good results on more than one occasion by contacting Estes customer service, and finding items I asked about added to the web site or changed from out of stock to in stock. Once, I asked about how I might get a nose cone that's not normally sold as a part outside the kit it's used in, and Denise just sent me one. It looked like it had sat on someone's desk or a conference room table for awhile, but at least I got one. Denise is awesome. |
#8
|
|||
|
|||
Just received an email from Estes. The new 29 mm motor mounts come in three sizes to fit BT-60, BT-65 and BT-80 airframes.
__________________
I like the unusual, the off beat, the avant-garde. No 3/4 FNC for me! |
#9
|
||||
|
||||
BMS offers centering rings for BT-60, 70, 80, and 3” tubes, for use with 29mm motor tubes. They range in price from 30 cents to $1.25. And a 34” 29mm motor tube (T52) is only $5.
__________________
Lee Reep NAR 55948 Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor In the Paint Shop: Nothing! Too cold! Launch-Ready: Farside-X, Maxi Honest John, Super Scamp |
#10
|
||||
|
||||
Quote:
FedEx folded my 34” tubes neatly in half despite excellent boxing by BMS. |
Thread Tools | Search this Thread |
Display Modes | |
|
|