08-27-2012, 10:28 AM
|
Craftsman
|
|
Join Date: Sep 2007
Location: Minneapolis, MN
Posts: 202
|
|
Quote:
Originally Posted by sandman
I've measured the tube with my digital caliper.
The O.D. is 0.770 and the I.D. is 0.700.
That matches with a T-20+ from Totally Tubular (erockets now)
http://www.erockets.biz/Totally-Tubular.html
The inside tube will be a BT-20.
It may be hard to glue the BT-20 in without it grabbing on you.
The other cheaper alternative is a standard BT-20 with the tube coupler inside and building up the O.D. of the BT-20 just at the ends where it's glued into it's mating parts.
You could do that with just strips of paper glued on the ends.
|
Great information, thanks.
Could you measure the length of your tube for me? I've read it's 9.25" but wanted to confirm. It's kind of a critical measurement in order for the rotors to release properly.
-Tim
|