#1
|
|||
|
|||
Estes PNC-60MS Nose Cone
This is a 3D model of the Estes PNC-60MS nose cone that is designed to fit Estes BT-60 airframe tubing.
There are six files to download. There are five of the nose cone itself and the other is the end cap which has a 3mm hole in it to allow you to add a screw eye or eye bolt. The first nose cone is has 1.5mm thick walls and has a 32mm long shoulder. The second has 1.5mm thick walls and a 19mm shoulder. The third has 1.0mm thick walls and a 19mm shoulder. This nose cone was specifically designed for DynaSoar Rocketry's Orbital Transporter Mini RC Rocket glider kit. The nose cone should weigh between 10 and 12 grams. This design is about 11g using PLA. You can find out more about this kit here. https://dynasoarrocketry.com/?page_id=7309 DynaSoar Rocketry Youtube channel: https://www.youtube.com/user/burkefj The fourth and fifth nose cones are the cones only without the shoulders and have 1.0mm and 1.5mm thick walls. Estes kits that use this nose cone: Kit# 1223 Big Bertha Kit# 1261 Baby Bertha Kit# 1387 Max Streak Kit# 1391 Mini Shuttle Kit# 1948 Big Bertha (re-issue) Kit# 2021 Rascal Kit# 2119 36 D Squared Kit# 2173 Menace Kit# 2442 Mini Fat Boy Kit# 7007 Big Bertha (boxed) Note: This nose cone can be upscaled in your slicer to fit the Estes Super Big Bertha model rocket kit. |
#2
|
||||
|
||||
Thank you so very much for all your hard work and for providing this to us
__________________
======================= If the Sky is the Limit, then, why is there Footsteps on the Moon? ======================= |
#3
|
|||
|
|||
Glad to do it!
|
#4
|
|||
|
|||
Great Job! Keep up this important work for the hobby!
__________________
"Old Rocketeer's don't die; they just go OOP".....unless you 3D print them. |
Thread Tools | Search this Thread |
Display Modes | |
|
|