a great kit was the uss andromeda. will we wver see the kit back in production? i know i can put one together by other means. i would enjoy seeing the kit in production from estes. what are the chances? take care.

__________________
craftsman, builder of exotics

Unless he has decals made with an Alps printer, you probably won't be satisfied with them. The only other way to get white is $creen printing. If they are laser or inkjet, you will end up with crappy white decal paper or decals with another color substituted for white.

__________________
I love sanding.

I have built 3 of their kits.
They were all up to expectations I have of kits.

__________________
When in doubt, WHACK the GAS and DITCH the brake !!!
No Harm=NO Foul advocate

If you are NOT FLYING LOW in the left lane, you need to GET THE #$&@ OUT of it !

Yes, there is such a thing as NORMAL, if you have to ask, you probably aren't !

I read through these old threads:

http://forums.rocketshoppe.com/show...ght=morerockets
http://forums.rocketshoppe.com/show...ght=morerockets

Is this a good vendor?

__________________
-Wolfram v. Kiparski
NAR 28643
TRA 15520
MTMA Senior Advisor

I have bought their kits and have had no trouble with them.
I have corresponded with the ower and he corresponded in a reasonable time.

The kits are of top-notch quality and arrived quickly.
This was about 3-4 years ago before all the hullabaloo that does not concern me.

__________________
When in doubt, WHACK the GAS and DITCH the brake !!!
No Harm=NO Foul advocate

If you are NOT FLYING LOW in the left lane, you need to GET THE #$&@ OUT of it !

Yes, there is such a thing as NORMAL, if you have to ask, you probably aren't !

But you haven't flown rockets for over three years, much less built anything. I'd rather hear from people who are actually in the hobby.

__________________
-Wolfram v. Kiparski
NAR 28643
TRA 15520
MTMA Senior Advisor

I did not say anything about the quality of the kit. I only stated that the Andromeda decals will have to be Alps printed due to having white in them or they will not look right.

__________________
I love sanding.

__________________
Bill Eichelberger
NAR 79563

http://wallyum.blogspot.com/

I miss being SAM 0058

On the build floor: Estes - ESAM-58, Semroc Squire

In paint: Centuri Stellar Hercules, Semroc Thunder Strike, FRW Cherokee E

In the body shop: Estes Jayhawk, TLP Perseus

Ready to fly: Estes Astron Farside X, Estes Astron Apogee, FRW Star Jart, RDC V-Max