This a was jet fighter/drone style kit I built (poorly) as middle schooler. My model rocket is long since lost. This is a classic Mike Dorffler design.

Has anyone over the years re-released it or issued a clone of it? It seems a little complicated to scratch build.

Thanks in advance!

__________________
Brock R. Wood, NAR 87453; Playing with model rockets since the purchase of an Estes "Launcher's Special" parts assortment in 1976.

__________________
Jeffrey Deem
NAR16741
CIA section 527

Oh, Gosh! You are da man! Thank you!

__________________
Brock R. Wood, NAR 87453; Playing with model rockets since the purchase of an Estes "Launcher's Special" parts assortment in 1976.

Oh, I think you could clone one without too much trouble - the plans/scans are here in Ye Olde Rocket Shoppe and Tango Papa has full waterslide decal sets for $12 - Stickershock has cut vinyl in the original size up to 7” diameter upsized!

That morerockets kit is a BT-20 body tube and comes with an 18” parachute. That is going to be a pain to pack recovery gear. I’d upscaled it and use decals from one of the mentioned providers. (Tango Papa will do upscales, he did my decals for an upscaled Orbital Transport.)

__________________
Lee Reep
NAR 55948

Projects: Semroc Saturn 1B, EAC Firecat (Mini HoJo bash), Estes Maxi Honest John
In the Paint Shop: Estes 1:100 Saturn 1B (old #2048 kit)
Launch-Ready: Farside-X, Cirrus (scratch 29mm min. dia.), Bertha and Betty (inseparable sisters)

Esquire, Jimz has the plans listed as well,

http://www.spacemodeling.org/jimz/est0806.htm

Or buy the repop kit from,
http://morerockets.com/Reproduction...et-Kits/Pegasus

I’d recommend you 86 the 18” diameter plastic chute though. Or use a thin-mil nylon chute in it, like a real cool rotofoil chute from,
https://www.bamachutes.com/store/p1/Rotofoil.html

TigerHawk! You are a YORF guy, too!

__________________
Brock R. Wood, NAR 87453; Playing with model rockets since the purchase of an Estes "Launcher's Special" parts assortment in 1976.

I cloned this rocket years ago when I became a full time BAR back in 2008.
I upscaled to a BT-55 tube, the wings could not take the weight.
My conclusion was a special plastic coupler that would allow you to bind the wings to the BT tube.

__________________
If it flies, I can crash it!

I found a 1.00X RockSim file that may help upscale projects:

https://www.rocketreviews.com/rocks...es-pegasus.html

__________________
Jay Goemmer
"Centuri Guy"/"Tau Zero"
YORF Member 28
Semroc SAM #0029
NAR 86131

"Your lightyears may vary."


“Centuri fret buzz in an updated form.”
Bill “Wallyum” Eichelberger re: Estes Flutter-By
03 Sept 2014

Here's an original on eBay............

https://www.ebay.com/itm/1250282209...AAOSw7zxhpto V