Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > The Golden Age of Model Rocketry > Plans & Publications
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-16-2019, 01:57 PM
Ltvscout's Avatar
Ltvscout Ltvscout is offline
Ye Olde Rocket Shoppe
 
Join Date: Jun 2004
Location: Milwaukee, WI
Posts: 5,581
Default Thrustline Aerospace Mike IX Plans

The link below will take you to the plans for the Mike IX kit.

Each plan set also includes a RockSim file for the kit. That's a good thing since nowhere could I find a parts list of tubing type, length, etc. I'd appreciate it if someone with RockSim or OpenRocket will give me a hand by adding a reply to this post listing the parts type/size you extract from the RockSim file. If you could include the templates from the RockSim file I'd appreciate that as well.

There are multiple RockSim files in this plan set. Since I don't have RockSim or OpenRocket I'm not sure what the differences are.

http://www.oldrocketplans.com/tla/TLA_Mike_IX.zip

These Thrustline Aerospace plans are for PERSONAL USE ONLY! John Rowan-Stern and Thrustline Aerospace reserves all commercial use rights.
__________________
Scott D. Hansen
Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe!
Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies!
Ye Olde Rocket Forum
Ye Olde Rocket Auction
WOOSH NAR Section #558
Reply With Quote
  #2  
Old 02-19-2019, 10:25 PM
teflonrocketry1's Avatar
teflonrocketry1 teflonrocketry1 is offline
Craftsman
 
Join Date: Aug 2007
Location: Whitehouse, Ohio
Posts: 237
Default

Scott,

Attached below is the data for the Thrustline Aerospace Mike IX from the RockSim file mike9emrr:

TLA Mike IX Parts

Nose cone Custom Thrustline BT80 Nose Cone, Material: Balsa Nose shape: Solid Parabolic, Len: 7.6875 In., Dia: 2.6000 In. Body insert: OD: 2.5680 In., Len: 1.5000 In. CG: 6.3297 In. , Mass: 2.2868 Oz.

Eye Hook - Custom, Material: Mass: 0.4000 Oz.

Body tube Thrustline BT-80 Body Tube, Material: Paper OD: 2.6000 In. , ID: 2.5880 In. , Len: 17.0000 In. CG: 8.5000 In. , Mass: 0.5391 Oz.

30" Parachute Thrustline 30" Round Parachute, Material: Rip stop nylon 1 parachute, Shape: Round Dia: 30.0000 In., Spill hole: 0.0000 In. CG: 0.0000 In. , Mass: 1.0000 Oz.

Shock cord - Custom, Material: 5/64 In. round elastic CG: 0.0000 In. , Mass: 0.1594 Oz

Body tube Thrustline BT-80 Body Tube, Material: Paper OD: 2.6000 In. , ID: 2.5880 In. , Len: 17.0000 In. CG: 8.5000 In. , Mass: 0.5391 Oz.

Tube coupler LOC Precision - TC-2.56 - Tube Coupler, Material: paper Tube couplerOD: 2.5880 In., Hole #1: : 60.7314 In. Len: 3.0000 In. Location: - 1.5000 In. From the front of Body tube

Bulkhead - Custom, Material: Basswood BulkheadOD: 2.5880 In., Hole #1: : 23.6220 In. Len: 0.1250 In. Location: 1.5000 In. From the front of Body tube

Fwd Fin set - Custom, 4 fins Material: Balsa (0.125" thick) Radial angle 0 degrees
Point List in mm :
95.25000062865, 0.
95.25000062865, 12.70000008382
25.40000016764, 12.70000008382
0., 0.

Mid Fin set - Custom, 4 fins Material: Balsa (0.125" thick) Radial angle 0 degrees
Point List in mm :
133.35000088011, 0.
133.35000088011, 80.9625005343525
114.30000075438, 80.9625005343525
0., 0.

Fwd MMT Centering Ring Apogee - 13031 - CR 18-24, Material: Paper Centering ringOD: 2.5880 In., Hole #1: : 0.9760 In. Hole #2: : 0.9760 In. Hole #3: : 0.9760 In. Len: 0.1875 In. Location: 4.0000 In. From the base of Body tube

Aft MMT Centering Ring Apogee - 13031 - CR 18-24, Material: Paper Centering ringOD: 2.5880 In., Hole #1: : 0.9760 In. Hole #2: : 0.9760 In. Hole #3: : 0.9760 In. Len: 0.1875 In. Location: 0.1250 In. From the base of Body tube

24mm MMT 1 Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 6.0000 In. Location: 0.0000 In. From the base of Body tube

24mm MMT 2 Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 6.0000 In. Location: 0.0000 In. From the base of Body tube

24mm MMT 3 Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 6.0000 In. Location: 0.0000 In. From the base of Body tube

Aft Fin set - Custom, 4 fins Material: Balsa (0.125" thick) Radial angle 0 degrees
Point List in mm :
114.30000075438, 0.
114.30000075438, 101.60000067056
63.5000004191, 101.60000067056
0., 0.
Attached Files
File Type: pdf TLA_Mike_IX_2.pdf (1.6 KB, 19 views)
File Type: pdf TLA_Mike_IX_3.pdf (1.6 KB, 15 views)
File Type: pdf TLA_Mike_IX_4.pdf (1.8 KB, 16 views)
File Type: pdf TLA_Mike_IX_5.pdf (1.6 KB, 16 views)
__________________
Bruce S. Levison, NAR #69055
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 01:41 PM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe 1998-2019