#11
|
|||
|
|||
I can't find the fin templates, but it's basically a straight up 3X upscale (.736 to 2.26). The body tube is 27" long, the fins are 1/8" ply, and there's a fair amount of weight in the nose. It weighs 173 grams. The cockpit was printed out on card stock and assembled, then covered with 6oz fiberglass and epoxy. As I mentioned earlier, it flies on rails with Loki G80's.
__________________
Quando Omni Flunkus Moritati |
#12
|
|||
|
|||
I found my templates. There are TTW tabs for a 38mm motor tube. Adjust if you plan on going with a 29mm mount. Wings and rudder were cut from 1/8" ply. If anyone has a question about the build let me know.
Buzz
__________________
Quando Omni Flunkus Moritati |
Thread Tools | Search this Thread |
Display Modes | |
|
|