This pic seems to work in the test area, so I'll try here. This was cloned a couple years ago. Raped an Executioner with Stickershock vinyl. https://forums.rocketshoppe.com/att...tid=57601&stc=1

Attached Thumbnails

   

I have an original I built, and yours looks great!

Thx for the compliment.

+1 to that.
Looks great !
Did you put a 29mm mount in it or stock 24mm ?

__________________
When in doubt, WHACK the GAS and DITCH the brake !!!

Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't !
Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY.
ALL systems are GO for MAYHEM, CHAOS, and HAVOC !

Very nice job!
I have that one on my build list for winter.

Left it at 24mm.

Looks great. This one has long been on my list of rockets to clone, but it's a long list.

__________________
Bill Eichelberger
NAR 79563

http://wallyum.blogspot.com/

I miss being SAM 0058

Build floor: Centuri Design Contest F-150 Hurricane Estes - Low Boom SST Semroc - Marauder, Shrike, SST Shuttle

In paint: Canaroc Starfighter Scorpion Estes F-22 Air Superiority Fighter, Multi-Roc, Solar Sailer II Semroc Cyber III

Ready to fly: Estes - Solar Sailer II Semroc - Earmark, Groonie Der V 1/2

Clone this earlier this year. I upgraded to 29mm.
-W

__________________
-Wolfram v. Kiparski
NAR 28643 - TRA 15520
MTMA Section #606 President

I may pick up a Maxi Alpha and a section of BT80 to clone as well.

__________________
When in doubt, WHACK the GAS and DITCH the brake !!!

Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't !
Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY.
ALL systems are GO for MAYHEM, CHAOS, and HAVOC !

As per the plans, the Colossus uses four 9" long BT80's to get 36". I cloned it with BT80's from Balsa Machining, which are 34" long. I just added a 2" section from another tube, and eliminated 2 of the BT80 joints.